Back to Top Skip to main content

Army, FDA discuss 3D printing at workshop

When a medical device breaks down on a medical unit deployed to a remote part of the world, the closest repair parts could be thousands of miles away (U.S. Army photo by Francis S. Trachta) When a medical device breaks down on a medical unit deployed to a remote part of the world, the closest repair parts could be thousands of miles away (U.S. Army photo by Francis S. Trachta)

Recommended Content:

Military Hospitals and Clinics | Technology | Combat Support | Medical Logistics

FORT DETRICK, Md. — When a medical device breaks down on a U.S. Army unit deployed to a remote part of the world, the closest repair parts could be thousands of miles away.

Even when parts are readily available, the shipping process – sometimes into hostile environments – could take days or even weeks, if it’s logistically feasible at all.

As the Army embraces advanced manufacturing in its modernization strategies, medical logisticians are looking to 3D printing as a potential solution to this challenge.

"The medical industry is one of the fastest innovators in the defense industrial base, so the AMLC is used to working with industrial partners constantly pushing the state of the art,” said Jack Rosarius, director of Medical Maintenance Management Directorate within the U.S. Army Medical Materiel Agency, a direct reporting unit to Army Medical Logistics Command.

Specifically for medical devices, 3D printing technology – also known as additive manufacturing – may enable the Army to develop repair parts that extend the life cycle of equipment and ensure they are ready for use when and where Soldiers need them.

While the technology offers numerous new uses and potential advantages, it also poses regulatory challenges and warrants safety considerations still under review by the U.S. Food and Drug Administration.

On Dec. 9, 2019, AMLC hosted a military-specific workshop at Fort Detrick with FDA leaders on the topic to seek guidance on current policies, concept regulations and potential stumbling blocks as it explores manufacturing its own repair parts and other 3D-printed items.

Representatives from Army Materiel Command, Air Force and Defense Health Agency also took part in the discussion.

‘Really excited’

USAMMA started piloting additive manufacturing in 2015 in partnership with its equipment program managers. Rosarius said a heightened top-down focus from Army senior leadership has only helped to push the 3D printing movement forward.

“I’m really excited about the opportunities,” said USAMMA Commander Col. Timothy D. Walsh, who also serves as deputy commander of AMLC. “It’s an exciting time to be a part of Army medicine.”

The 3D printing process involves building a three-dimensional object using a computer-aided design model by adding material layer by layer, which is why it’s called additive manufacturing.

The process differs from conventional machining, casting or forging, in which material is removed from a stock item or poured into a mold and shaped to form a product.

Through 3D printing, medical devices can be produced using a range of media, including metals, plastics, hydrogels or even biological materials. Most printing systems do this by dividing or slicing a digital design file in two-dimensional layers, then building each layer on top of the previous layer.

According to the FDA, medical companies began embracing additive manufacturing to create devices that were previously impossible to make, personalized to the patient or both.

‘Gray areas’

While the technology has unlocked new production possibilities, it also has prompted the FDA to explore conceptual regulations to safeguard patients and institute performance requirements.

“The FDA is very focused on what the risk is and how to mitigate it” with 3D-printed medical products, said Matthew A. Di Prima, materials engineer for the agency.

Heather L. Agler, a senior program manager for the FDA, said the technology has created new “gray areas,” specifically when it comes to military production and uses.

Patient safety, however, remains the overarching issue under consideration by federal regulators.

Army’s commitment

During the workshop, AMLC officials gave an overview of the Army’s Advanced Manufacturing Directive and briefed the FDA on efforts to date.

USAMMA has made successful use of 3D printing to produce some obsolete repair parts already, like an impeller for a medical sink or a locking pin for a vaporizer used on an anesthesia machine.

Many more are in various stages of development or design.

“The Advanced Manufacturing Directive demonstrates the Army's commitment to getting this right, so we're positioned for multi-domain operations and large-scale combat operations,” Rosarius said. “The medical maintenance community is excited about expanding the ways we can support patient care downrange.”

Di Prima highlighted different additive manufacturing use-cases, in addition to current agency policy considerations for manufacturers.

The group also worked through different Army-specific scenarios to identify possible snags for ongoing or future efforts, as well as several action items for further discussion.

“We’re happy to participate,” Agler said. “The military is always thinking forward. It’s good to be able to learn … and very important that we continue to work together to make sure you have the right things available when they are needed.”

Disclaimer: Re-published content may be edited for length and clarity. Read original post.

You also may be interested in...

DHA improves financial efficiency with consolidated funding system

Article
11/20/2020
Soldier wearing mask, marking items off in supply room

The conversions enable GFEBS financial structure and funding control by the DHA.

Recommended Content:

Technology

NMRTU Everett staff collaborate to ensure Patient Centered Care

Article
11/16/2020
Image of two military personnel wearing masks

NMRTU Everett was commended by the MHS 2020 Advancement towards High Reliability Healthcare Awards Program as a Patient Centeredness Award winner.

Recommended Content:

Combat Support | Public Health | Coronavirus

Naval Medical Forces Pacific’s commander tours NH Twentynine Palms

Article
11/12/2020
Four military personnel in uniform, wearing masks

Weber was briefed on the implementation of MHS GENESIS...and the hospital's response to COVID-19.

Recommended Content:

Combat Support | Health Readiness | Coronavirus | MHS GENESIS

Walter Reed, VA focus on joint efforts in 3D medical application

Article
11/9/2020
Three physicians wearing masks; one sitting at a desk, two standing

The JIF award focuses on the Department of Defense/VA 3D Printing Consortium for Medical Applications.

Recommended Content:

Research and Innovation | Technology

Military Health podcasts provide resources for patients and providers

Article
11/6/2020
Hands holding a smartphone with the Living Beyond Pain podcast playing on the device.

Podcasts have become an increasingly popular way of getting information.

Recommended Content:

Technology | Pain Management | Connected Health

BAMC, Argentine Army medical providers share COVID-19 best practices

Article
11/4/2020
Video teleconference image

U.S. Army South facilitated the virtual subject matter expert (SME) exchange between BAMC and CMMH.

Recommended Content:

Coronavirus | Global Health Engagement | Technology | COVID-19 Vaccine Efforts | Public Health | Convalescent Plasma Collection Program

Military medical heroes honored for service above and beyond

Article
11/4/2020
Four military personnel shown during a Zoom call

[T]he service and sacrifice of heroes is “a core strength of our military's resolve and skill."

Recommended Content:

Combat Support

Indiana National Guard amputee stays true to his motto - ‘Never Quit’

Article
11/3/2020
Soldier with leg prosthesis putting on his shoe.

Life and limbs are often casualties.

Recommended Content:

Combat Support

Military nurses hold virtual research & evidence-based practice course

Article
10/30/2020
Two nurses, wearing masks, examining a mannequin

Due to the COVID-19 national emergency, the three-day in-person course was abbreviated to a one-day virtual.

Recommended Content:

Coronavirus | Public Health | Combat Support | Research and Innovation

‘Virtual Ward’ pilot program to reduce hospital stay time

Article
10/30/2020
Man's arm with blood pressure cuff and fingertip pulse oximeter

"The idea is that instead of staying in hospital longer..., patients are released early and can recover in the comfort and privacy of their homes."

Recommended Content:

Health Readiness | Technology | Coronavirus | Public Health

Weed ACH hosted breast cancer awareness event

Article
10/28/2020
Woman in pink hat and shirt, wearing a racing number, speaking to an audience

National Breast Cancer Awareness Month is a chance to raise awareness about the importance of early detection of breast cancer.

Recommended Content:

Health Readiness | Combat Support | Women's Health | Health Literacy Month 2020

WRNMMC expands innovation and opens new, permanent drive-thru pharmacy

Article
10/23/2020
Military pharmacist, wearing a mask, looking at bags of prescriptions

The new Prescription Drive-Thru Pick-up will operate similarly as the curbside pharmacy pick-up.

Recommended Content:

Research and Innovation | Combat Support | Public Health | Coronavirus | Health Literacy Month 2020

Army Social Worker for the Year: Lt. Col. Etheridge

Article
10/22/2020
Two military personnel, wearing masks, holding a crystal award

The award is presented annually to active duty social workers in the field of 73A (Social Worker).

Recommended Content:

Combat Support

Fort Irwin DENTAC strives to reach readiness perfection

Article
10/21/2020
Image of patient getting a dental exam

To accommodate an entire installation, the dental clinic extended its hours.

Recommended Content:

Public Health | Coronavirus | MHS GENESIS | Combat Support

Navy pharmacy techs support COVID-19 and MHS GENESIS efforts

Article
10/20/2020
Navy personnel in a pharmacy

Hospital Corpsman 1st Class Aaron Souders is highlighted for his work as a Navy pharmacy technician.

Recommended Content:

Coronavirus | MHS GENESIS | Combat Support
<< < 1 2 3 4 5  ... > >> 
Showing results 1 - 15 Page 1 of 11

DHA Address: 7700 Arlington Boulevard | Suite 5101 | Falls Church, VA | 22042-5101

Some documents are presented in Portable Document Format (PDF). A PDF reader is required for viewing. Download a PDF Reader or learn more about PDFs.