Back to Top Skip to main content

Army, FDA discuss 3D printing at workshop

When a medical device breaks down on a medical unit deployed to a remote part of the world, the closest repair parts could be thousands of miles away (U.S. Army photo by Francis S. Trachta) When a medical device breaks down on a medical unit deployed to a remote part of the world, the closest repair parts could be thousands of miles away (U.S. Army photo by Francis S. Trachta)

Recommended Content:

Military Hospitals and Clinics | Technology | Combat Support | Medical Logistics

FORT DETRICK, Md. — When a medical device breaks down on a U.S. Army unit deployed to a remote part of the world, the closest repair parts could be thousands of miles away.

Even when parts are readily available, the shipping process – sometimes into hostile environments – could take days or even weeks, if it’s logistically feasible at all.

As the Army embraces advanced manufacturing in its modernization strategies, medical logisticians are looking to 3D printing as a potential solution to this challenge.

"The medical industry is one of the fastest innovators in the defense industrial base, so the AMLC is used to working with industrial partners constantly pushing the state of the art,” said Jack Rosarius, director of Medical Maintenance Management Directorate within the U.S. Army Medical Materiel Agency, a direct reporting unit to Army Medical Logistics Command.

Specifically for medical devices, 3D printing technology – also known as additive manufacturing – may enable the Army to develop repair parts that extend the life cycle of equipment and ensure they are ready for use when and where Soldiers need them.

While the technology offers numerous new uses and potential advantages, it also poses regulatory challenges and warrants safety considerations still under review by the U.S. Food and Drug Administration.

On Dec. 9, 2019, AMLC hosted a military-specific workshop at Fort Detrick with FDA leaders on the topic to seek guidance on current policies, concept regulations and potential stumbling blocks as it explores manufacturing its own repair parts and other 3D-printed items.

Representatives from Army Materiel Command, Air Force and Defense Health Agency also took part in the discussion.

‘Really excited’

USAMMA started piloting additive manufacturing in 2015 in partnership with its equipment program managers. Rosarius said a heightened top-down focus from Army senior leadership has only helped to push the 3D printing movement forward.

“I’m really excited about the opportunities,” said USAMMA Commander Col. Timothy D. Walsh, who also serves as deputy commander of AMLC. “It’s an exciting time to be a part of Army medicine.”

The 3D printing process involves building a three-dimensional object using a computer-aided design model by adding material layer by layer, which is why it’s called additive manufacturing.

The process differs from conventional machining, casting or forging, in which material is removed from a stock item or poured into a mold and shaped to form a product.

Through 3D printing, medical devices can be produced using a range of media, including metals, plastics, hydrogels or even biological materials. Most printing systems do this by dividing or slicing a digital design file in two-dimensional layers, then building each layer on top of the previous layer.

According to the FDA, medical companies began embracing additive manufacturing to create devices that were previously impossible to make, personalized to the patient or both.

‘Gray areas’

While the technology has unlocked new production possibilities, it also has prompted the FDA to explore conceptual regulations to safeguard patients and institute performance requirements.

“The FDA is very focused on what the risk is and how to mitigate it” with 3D-printed medical products, said Matthew A. Di Prima, materials engineer for the agency.

Heather L. Agler, a senior program manager for the FDA, said the technology has created new “gray areas,” specifically when it comes to military production and uses.

Patient safety, however, remains the overarching issue under consideration by federal regulators.

Army’s commitment

During the workshop, AMLC officials gave an overview of the Army’s Advanced Manufacturing Directive and briefed the FDA on efforts to date.

USAMMA has made successful use of 3D printing to produce some obsolete repair parts already, like an impeller for a medical sink or a locking pin for a vaporizer used on an anesthesia machine.

Many more are in various stages of development or design.

“The Advanced Manufacturing Directive demonstrates the Army's commitment to getting this right, so we're positioned for multi-domain operations and large-scale combat operations,” Rosarius said. “The medical maintenance community is excited about expanding the ways we can support patient care downrange.”

Di Prima highlighted different additive manufacturing use-cases, in addition to current agency policy considerations for manufacturers.

The group also worked through different Army-specific scenarios to identify possible snags for ongoing or future efforts, as well as several action items for further discussion.

“We’re happy to participate,” Agler said. “The military is always thinking forward. It’s good to be able to learn … and very important that we continue to work together to make sure you have the right things available when they are needed.”

Disclaimer: Re-published content may be edited for length and clarity. Read original post.

You also may be interested in...

Theater Enterprise-Wide Logistics Systems (TEWLS)

Fact Sheet
10/29/2020

TEWLS consolidates numerous military logistics functions into a single application and database.

Recommended Content:

Medical Logistics | Technology | Solution Delivery Division

Joint Medical Asset Repository (JMAR)

Fact Sheet
10/29/2020

JMAR provides 24/7 access to medical asset information for users, on any computer

Recommended Content:

Medical Logistics | Technology | Solution Delivery Division

Essentris®

Fact Sheet
10/26/2020

The military’s inpatient electronic health record is used in acute hospital environments, providing point-of-care data capture at the patient’s bedside for physiological devices, fetal/uterine devices, ventilators and other patient care machines.

Recommended Content:

Technology | Federal Electronic Health Record Modernization (FEHRM) Program Office | Solution Delivery Division

AHLTA Web Print

Fact Sheet
10/26/2020

AHLTA Web Print (AWP) is an application embedded in the AHLTA client workstation that provides the ability to print a patient’s entire AHLTA medical record or a subset, eliminating the need to print each AHLTA encounter or result separately.

Recommended Content:

Technology | Federal Electronic Health Record Modernization (FEHRM) Program Office | Solution Delivery Division

Composite Health Care System

Fact Sheet
10/26/2020

The Composite Health Care System (CHCS) allows clinicians to electronically perform patient appointment processes and scheduling, order laboratory tests, authorize radiology procedures and prescribe medications.

Recommended Content:

Technology | Solution Delivery Division

AHLTA 3.3

Fact Sheet
10/26/2020

AHLTA 3.3, a major component of the military’s electronic health record, is the primary clinical information system used by the military’s medical community to help generate, maintain, store and securely access data for 9.5 million beneficiaries.

Recommended Content:

Technology | Federal Electronic Health Record Modernization (FEHRM) Program Office | Solution Delivery Division

TOL Patient Portal Secure Messaging

Fact Sheet
9/29/2020

TRICARE Online Patient Portal (TOLPP) Secure Messaging (SM) provides Military Health System patients who receive care at a military treatment facility or clinic access to a robust messaging capability, allowing authorized patients the ability to securely communicate with their health care team.

Recommended Content:

Technology

Solution Delivery Division

Fact Sheet
11/12/2019

The mission of Solution Delivery Division (SDD) is enhancing Health Service Delivery through exceptional Information and Technology.

Recommended Content:

Technology

Special Needs Program Management Information System (SNPMIS)

Fact Sheet
8/15/2019

SNPMIS documents and reports on services provided to TRICARE patients with special needs.

Recommended Content:

Technology | Solution Delivery Division

Nutrition Management Information System (NMIS)

Fact Sheet
6/19/2019

NMIS is a fully integrated nutrition management system supporting military readiness and the war fighter worldwide.

Recommended Content:

Technology | Solution Delivery Division

Defense Occupational and Environmental Health Readiness System – Hearing Conservation (DOEHRS-HC)

Fact Sheet
6/17/2019

The Defense Occupational and Environmental Health Readiness System – Hearing Conservation (DOEHRS-HC) is an information system designed to support personal auditory readiness and help prevent hearing loss through early detection.

Recommended Content:

Technology | Hearing Loss | Solution Delivery Division

Expense Assignment System (EAS IV)

Fact Sheet
6/11/2019

EAS IV is a Web-based tool essential to the Department of Defense because it assists the Defense Health Agency in identifying the total cost of providing health care to TRICARE patients.

Recommended Content:

Technology | Solution Delivery Division

Coding and Compliance Editor (CCE)

Fact Sheet
6/11/2019

CCE supports the Department of Defense efforts to improve coding accuracy and reimbursements for inpatient and outpatient services.

Recommended Content:

Technology | Solution Delivery Division

Patient Encounter Processing and Reporting (PEPR)

Fact Sheet
6/11/2019

PEPR allows analysis of purchased care claims data created by the TRICARE Managed Care Support Contractors.

Recommended Content:

Technology | Solution Delivery Division

Military Health System (MHS) Population Health Portal (PHP)

Fact Sheet
6/11/2019

Military Health System (MHS) Population Health Portal (PHP) Fact Sheet

Recommended Content:

Technology | Solution Delivery Division
<< < 1 2 > >> 
Showing results 1 - 15 Page 1 of 2

DHA Address: 7700 Arlington Boulevard | Suite 5101 | Falls Church, VA | 22042-5101

Some documents are presented in Portable Document Format (PDF). A PDF reader is required for viewing. Download a PDF Reader or learn more about PDFs.