Back to Top Skip to main content

Walter Reed, VA focus on joint efforts in 3D medical application

Three physicians wearing masks; one sitting at a desk, two standing Peter Liacouras, Ph.D., director of the 3-D Medical Applications Center at Walter Reed National Military Medical Center, explains to physicians from the Washington DC Veterans Affairs (VA) Medical Center the capabilities of the 3D MAC at WRNMMC. (Photo by Bernard Little, Walter Reed National Military Medical Center.)

Recommended Content:

Research and Innovation | Technology

Leadership from the Washington, D.C. Veterans Affairs Medical Center visited Walter Reed National Military Medical Center last month to acknowledge the new Joint Incentive Fund (JIF) award between the two centers.

The JIF award focuses on the Department of Defense/VA 3D Printing Consortium for Medical Applications. The total JIF award was for more than $8.8 million with the WRNMMC/3D MAC portion at over $4.1 million for a project length of two years, according to Dr. Peter Liacouras, director of the services for WRNMMC’s 3D Medical Application Center.

In 2002, the 3D MAC opened at the former Walter Reed Army Medical Center (WRAMC), a predecessor of WRNMMC with the former National Naval Medical Center (NNMC), stated Liacouras, who joined the 3D MAC team in 2006. He added that in the late 1990s, an individual at NNMC was doing some 3D printing as well.

In 2007, the Naval Postgraduate Dental School (NPDS), at the then NNMC, started to invest in 3D printing for dental prosthetics, and then in 2011 with the Base Realignment and Closure law, the 3D MAC was relocated from the closing WRAMC to the new WRNMMC, Liacouras explained.

According to Military Health System (MHS) officials, the JIF was established under Section 721 of the FY 2003 National Defense Authorization Act “to provide seed money and incentives for innovative DoD/VA joint sharing initiatives to recapture Purchased CareThe TRICARE Health Program is often referred to as purchased care. It is the services we “purchase” through the managed care support contracts.purchased care, improve quality and drive cost savings at facilities, regional and national levels. JIF is only designated for use by the Veterans Health Administration (VHA) and Defense Health Agency (DHA) entities for direct medical sharing initiatives or for services or systems that facilitate DOD/VA interoperability.”

“Telehealth and 3D printing in health care settings are the wave of the future,” VA Secretary Robert Wilkie recently stated. In March, VA activated its 3D printing network to test 3D designs of medical equipment used by the nation’s health-care providers to combat the COVID-19 pandemic. This effort included developing 3D masks and other critical personal protective equipment (face shields, masks and ventilators) to bolster the nation’s fight against COVID-19.

Group of men, wearing masks, standing in front of a building
Walter Reed National Military Medical Center Director Army Col. (Dr.) Andrew Barr (fifth from left) and Director of the Washington DC Veterans Affairs Medical Center retired Army Col. Michael Heimall (sixth from left), along with members of their leadership team, met on Oct. 20 at WRNMMC to acknowledge the multi-million dollar Joint Incentive Fund award between the two centers focused on jointly advancing 3D medical technology for Military Health System and VA beneficiaries. (Photo by Bernard Little, Walter Reed National Military Medical Center.)

The VA is the first integrated health care system in the country to establish a national 3D Printing Network, allowing its health-care staff to share ideas, resources and best practices to deliver quality care to patients throughout its enterprise, according to VA officials. This collaboration will include the 3D at WRNMMC.

“The VA and DOD share a vision to provide a centralized system of services to service members that will benefit them throughout a lifetime,” Liacouras stated. “This system is created through an interdependent network of partnerships and establishes a national model for excellence, quality, access, satisfaction, and value.”

He explained the vision is supported by three key goals:

  • Delivering comprehensive benefits and services through an integrated client-centric approach that anticipates and addresses client needs.
  • Providing a patient-centered health-care system that delivers excellent quality, access, satisfaction, and value, consistently across the departments.
  • Establishing a national model for the effective and efficient delivery of benefits and services through joint planning and execution.

Liacouras further added that the JIF proposal sought funding to unify field-level DOD and VA hospital 3D printing efforts into a scalable DoD/VA 3D Printing Consortium through joint planning and execution.

At WRNMMC, the five-person 3D MAC team uses digital technology combined with additive manufacturing to provide medical-specific models and devices for MHS beneficiaries. The team produces custom implants, medical simulators, surgical guides, orthotics, prosthetic devices and patient-based anatomical models. They also assists in virtual-treatment planning, image capturing and research projects throughout DOD. The 3D MAC at WRNMMC is the DOD’s largest 3D medical printing center with a team that serves not only WRNMMC beneficiaries, but also other military facilities, federal entities and worldwide allied medical institutions.

This JIF award will allow WRNMMC to update and purchase multiple 3D printers and other digital technology; register with the FDA as a medical manufacturer; and increase training within WRNMMC and DOD.

Liacouras, explained to the capabilities of the center, elaborating on its role in four main areas of reconstructing patient radiological images to produce medical models and devices; developing new, low cost, high fidelity simulation models for resident training; designing and manufacturing unique limb prosthetic attachments for specialty activities; and producing devices and assisting in numerous research projects.

The 3D MAC team produces more than 1,000 products annually in support of military medicine, according to Liacouras.

Liacouras explained how the 3D MAC’s expertise, combined with collaborations across hospital departments and within DOD provides physicians and other professionals with the opportunity to use the state-of-the-art technology to positively impact the quality of life for military members and their families.

You also may be interested in...

Trauma and Injury Subcommittee Briefings

Presentation
6/14/2011

Trauma and Injury Subcommittee Briefing presented to the Defense Health Board June 14, 2011

Recommended Content:

Research and Innovation

Battlefield Trauma Care Research Development Test and Evaluation Priorities

Presentation
3/8/2011

Battlefield Trauma Care Research Development Test and Evaluation Priorities briefing presented to the Defense Health Board March 8, 2011

Recommended Content:

Research and Innovation

Progress Report on Walter Reed National Military Medical Center

Presentation
11/2/2010

Progress Report on Walter Reed National Military Medical Center briefing presented to the Defense Health Board Nov. 1, 2010

Recommended Content:

Medical Logistics | Research and Innovation

National Intrepid Center of Excellence

Presentation
11/1/2010

National Intrepid Center of Excellence briefing presented to the Defense Health Board Nov. 1, 2010

Recommended Content:

Research and Innovation | Traumatic Brain Injury

Proposed Revisions to Fluid Resuscitation in TACEVAC

Presentation
11/1/2010

Proposed Revisions to Fluid Resuscitation in TACEVAC briefing presented to the Defense Health Board Nov. 1, 2010

Recommended Content:

Research and Innovation

Military Suicide Research Consortium

Presentation
4/12/2010

Military Suicide Research Consortium briefing presented to the Defense Health Board April 12, 2010

Recommended Content:

Suicide Prevention | Research and Innovation

VISN 19 MIRECC Suicide Prevention Research Programs

Presentation
4/12/2010

VISN 19 MIRECC Suicide Prevention Research Programs briefing presented to the Defense Health Board April 12, 2010

Recommended Content:

Research and Innovation | Suicide Prevention

Handout for Defenders Edge DEFED Program Evaluation Results

Presentation
3/11/2010

Defenders Edge DEFED Program Evaluation Results briefing presented to the Defense Health Board March 11, 2010

Recommended Content:

Research and Innovation

RAND Study

Presentation
1/15/2010

RAND Study presented to the Defense Health Board January 15, 2010

Recommended Content:

Research and Innovation

Tap Root Brief

Presentation
1/15/2010

Tap Root Brief presented to the Defense Health Board January 15, 2010

Recommended Content:

Research and Innovation

Summary of Key Findings from the Mental Health Advisory Team 6 OEF and OIF

Presentation
1/15/2010

Summary of Key Findings from the Mental Health Advisory Team 6 OEF and OIF presented to the Defense Health Board January 15, 2010

Recommended Content:

Mental Health Care | Suicide Prevention | Research and Innovation

DoD Patient Suicide Root Cause Analysis Process

Presentation
1/15/2010

DoD Patient Suicide Root Cause Analysis Process presented to the Defense Health Board January 15, 2010

Recommended Content:

Research and Innovation | Suicide Prevention

DoD VA Conference Suicide Brief

Presentation
1/15/2010

DoD VA Conference Suicide Brief presented to the Defense Health Board January 15, 2010

Recommended Content:

Research and Innovation | Suicide Prevention

Epidemiological Studies WRAIR

Presentation
11/10/2009

Epidemiological Studies WRAIR presented to the Defense Health Board Nov. 10, 2009

Recommended Content:

Research and Innovation | Suicide Prevention

Army Health Promotion and Risk Reduction Campaign

Presentation
10/1/2009

Army Health Promotion and Risk Reduction Campaign presented to the Defense Health Board Oct. 1, 2009

Recommended Content:

Technology | Suicide Prevention
<< < 1 2 3 4 5 > >> 
Showing results 46 - 60 Page 4 of 5

DHA Address: 7700 Arlington Boulevard | Suite 5101 | Falls Church, VA | 22042-5101

Some documents are presented in Portable Document Format (PDF). A PDF reader is required for viewing. Download a PDF Reader or learn more about PDFs.